View RSS Feed

melev

  1. Silicone the overflow into the 60g cube and plumbed

    In a previous blog ( link ) I explained how I was securing the internal overflow to the base of the AGE tank. Well, even though it might have worked perfectly, my paranoia gene was flaring up and I kept thinking about how a leak from the base of the aquarium would require a full breakdown to correct the problem. Rather than just hoping for the best, I bought a tube of Aquarium-Safe silicone at Home Depot and applied it to the base of the box and reinstalled it.

    Name:  silicone-overflow-2.jpg
Views: 4413
Size:  149.3 KB
    ...
    Categories
    Plumbing
  2. Strengthening the steel stand

    After placing the 60g AGE tank on the Ez-Tube steel stand ( link ), I didn't feel comfortable with how it seemed to jiggle with minimal touch. It was empty, but the tank is heavy enough that it takes two people to place it on the stand. Water, sand and rock would add 600 lbs easily, and there's little doubt it would be even worse over time. Even cleaning the glass with a cleaning magnet would probably be concerning, so I decided to add some wood panels to the stand to limit racking. Plywood ...

    Updated 11-04-2013 at 03:29 PM by melev

    Tags: eztube
    Categories
    Equipment
  3. 60g: Black vinyl applied

    Tonight, I applied the black vinyl sheet to the back of the 60g. The back pane of the tank is 24" wide and 24" tall, and the piece of vinyl was larger than that.

    Name:  black-vinyl-2.jpg
Views: 2261
Size:  95.3 KB


    I cleaned the back of the tank with Windex and newspaper since that doesn't leave lint or smudges. Next, a spray bottle was filled up with tap water with a drop of Dawn dish detergent. I sprayed the back of the tank to get the entire surface wet.

    Name:  black-vinyl.jpg
Views: 2797
Size:  159.3 KB
    ...
    Tags: vinyl
    Categories
    Tank Entry
  4. Well this is a little embarrassing...

    For the past three months, my reef has been suffering from elevated phosphate levels. I've never had such a roller coaster, with the numbers rising and then falling as I treated to drop them again. Last night I did a lot of water testing.

    Name:  testing.JPG
Views: 4360
Size:  87.4 KB


    a) First I tested the 215g reef to check the levels.
    b)Then I checked the 400g that is full of water, sand and live rock to know if the parameters were close enough for livestock transfer and to ...

    Updated 10-24-2013 at 03:52 PM by melev

    Categories
    Water Chemistry
  5. Skimmers are wonderful

    Saturday night, my son helped me pump over 200g of saltwater into the 400g tank. Pumping the water into an upright pitcher, it seemed unlikely the water would get cloudy. Yet a day later it was somewhat murky, very different from the 215g running adjacent. Seeing the reef in nice clean water, it seemed like a poor choice moving those corals into the bigger tank.

    Using a Reef Octopus skimmer I have on hand, I placed it on an inverted bucket (one with no handle) inside the display ...
    Categories
    Tank Entry
Page 50 of 149 FirstFirst ... 40484950515260100 ... LastLast