Each day for the past week, I've been marking how much water is being used by my reef. I took a piece of blue masking tape and applied it vertically on the acrylic reservoir I made.
Each day around the same time, I drew a line, marked the day and time it was measured.
What I've discovered is that the ATO reservoir holds more
Years ago, I got a kit from Aquahub.com for my reef. I never did update my float switch system to his safer relay approach. Here's what I had for the past 8 years or more: http://www.melevsreef.com/plumbing/auto_topoff.html
With the new set up, I've tried to avoid holding anything back and went "all in" so to speak. So I pulled out the kit and noticed I needed some goodies. I called up Patrick at Aquahub and asked if he could ship me the missing pieces. He wondered where I got
Updated 02-27-2011 at 08:08 PM by melev
For years, I've used wrapping paper containers to hold 20g of RO/DI water for my reef's evaporated needs. With the new tank, I decided it would be sexier to put a custom-made acrylic vessel under the tank. I measured twice, opting to use every inch at my disposal, and proceeded to build it. The reservoir is 22" wide, 32.75" tall, and 15.5" deep. It has a small access door on the top to allow me to adjust the float valve when needed. It is made with 3/8" AcryLite GP.
Updated 02-04-2011 at 06:18 PM by melev