View RSS Feed

melev

The 400g Has Arrived

Rating: 12 votes, 5.00 average.
Friday September 6 2013 at 10:00 a.m., I was ready and waiting by the door for a big truck bearing my 400g replacement reef aquarium. The tank was due to arrive within moments along with 10 guys hired to bring it inside and onto the stand, courtesy of Marineland. I took the front door off the hinges, removed the hardware that pulls the storm door shut, and moved the framed photographs off the wall that the tank would pass beneath.

Name:  hallway-ready.JPG
Views: 3809
Size:  81.3 KB


Frank's Tanks provided me with eight aquarium-moving suction cups, and I bought some 1000 lbs-rated furniture dollies and tie-down straps to aide with getting the tank moved safely inside.

Name:  tank-moving-gear.JPG
Views: 1782
Size:  124.0 KB


Name:  fishroom-before-tank-3.jpg
Views: 1572
Size:  149.3 KB


Name:  fishroom-before-tank.jpg
Views: 1486
Size:  187.9 KB


Name:  fishroom-before-tank-2.jpg
Views: 1609
Size:  172.4 KB


At 10:45 a.m., some of the movers arrived and by 11:00 a.m. a big Penske truck backed into my driveway. The head count was only eight men, but Frank stopped by and with me, we had the full ten needed for this installation.

Name:  penske-truck.JPG
Views: 1388
Size:  165.4 KB


Name:  penske-backed-up.JPG
Views: 1345
Size:  130.8 KB


I explained to the movers how the tank would need to be brought in since I'd already gone through this previously, and they listened attentively. The tank has to be tilted on its side to navigate through the front door and the narrow hallway, which is barely millimeters wider than the tank. Then it has to be tilted back into its normal position and lifted onto the steel stand.

Name:  crate1.JPG
Views: 2123
Size:  134.0 KB


The lift gate is motorized, but they didn't have a pallet jack or forklift to take it off the truck for some unknown reason. The eight guys used all their muscle to pry it away from the wall of the truck. Using a furniture dolly for leverage, they pried the pallet up a couple of inches to slip some moving blankets underneath. This allowed them to slide it onto the metal lift gate.

Name:  crate2.JPG
Views: 1349
Size:  138.7 KB


Name:  crate3.JPG
Views: 1355
Size:  155.9 KB


The entire crate was easily 1300 lbs, if not more. Once lowered closer to the ground, the tank was carefully uncrated with cordless drills. Well over 100 screws were holding it together.

Name:  crate4.JPG
Views: 1393
Size:  130.7 KB


I really appreciated how carefully Marineland packed this tank to make sure it wouldn't get scratched. The 2x4 frame was knocked loose, and all the plywood sheets were utilized to build make-shift ramps to roll the tank from the driveway up the front step, over the threshold and into the house.

Name:  crate5.JPG
Views: 1571
Size:  137.8 KB


I had to repeatedly tell them not to lean, lift or press on the external overflow.

Name:  crate6-uncrated.JPG
Views: 1400
Size:  153.3 KB


The tank was literally gleaming like a gem in the morning sunlight once unveiled. Starphire on all three sides, it was a sight for sore eyes!

Name:  eot-unwrapped.JPG
Views: 1449
Size:  147.9 KB


Next, I demonstrated to everyone how the suction cups worked, how to place them and how they could be removed.

Name:  ready-to-move.JPG
Views: 1422
Size:  144.2 KB


Carefully we tilted the tank off the platform and onto waiting to dollies. Foam was placed on the dollies to avoid scratching the back panel of the tank. Everyone was informed that this was a zero-scratch project, and that every care had to be taken to keep it safe. The dollies were strapped to the tank, and then the entire beast was rolled across the plywood sheets and into the house. The guys were really good about making sure it stayed safe at all times.

Name:  tethered.JPG
Views: 1343
Size:  158.4 KB


Name:  rolled-into-position.JPG
Views: 1364
Size:  114.7 KB


Once in front of the stand, the tank was tilted back onto its base, and all the suction cups were repositioned for the big lift. It took all 10 of us to get it onto the stand, and then we shifted it into its final position. The guys then took all the trash from the crate and left. Awesome. The entire process took 45 minutes.



Name:  400g-on-stand.jpg
Views: 1538
Size:  184.4 KB


The tank is 84" x 36" x 30"; measuring the top plastic trim it is 94.25" long including the external overflow.

I've looked the tank over very closely and I'm delighted by the build quality. Since this is version 2.0, there have been some improvements. The top frame now wraps the entire perimeter of the tank which looks cleaner. The external overflow has four drain holes instead of five, which provides more space for the Durso Standpipes. The Eurobracing is doubled like last time, but now is stair stepped which looks great to the eye. The black trim is siliconed to the eurobracing this time, so any liquid on the top bracing won't wick out and run down the vertical panes of the tank. These are just a few of the changes.



Name:  new-400g-dog-view.jpg
Views: 1260
Size:  173.2 KB


Name:  new-400g-eot.jpg
Views: 1307
Size:  187.5 KB


Name:  new-400g-eurobracing.jpg
Views: 1462
Size:  175.1 KB


Name:  new-400g-ext-overflow-box.jpg
Views: 2125
Size:  176.3 KB


I'll be making an overflow cover with black acrylic that will fit nicely in the frame.

Name:  new-400g-ext-overflow-top.jpg
Views: 1276
Size:  147.3 KB


Name:  new-400g-ext-overflow1.jpg
Views: 1552
Size:  128.8 KB


Name:  new-400g-ext-overflow2.jpg
Views: 1529
Size:  151.7 KB


Both of the 36" ends are made with 3/4" glass this time. The external overflow is made with 1/2" glass, abutted against the 3/4" thick front and back pane. This creates a minor offset internally within the overflow, avoiding a shared silicone seam that appeared to be part of the previous tank's problem. The black overflow panel (which hides the external overflow from view) in the tank has a 3/4" vertical gap on both ends and this gap was filled with black silicone. If the acrylic panel absorbs water and swells, the gap prevents it pressing against the front and back panes that would force them apart, which may have been why the last tank leaked.

Name:  new-400g-fishroom-side.jpg
Views: 1401
Size:  179.4 KB


Name:  new-400g-long-view.jpg
Views: 1297
Size:  143.4 KB


Name:  new-400g-overflow-holes.jpg
Views: 1403
Size:  187.0 KB


The teeth are located directly under doubled-glass eurobracing, unlike the last tank. Everything looks so nice and clean, and the silicone work looks good.

Name:  new-400g-overflow-teeth.jpg
Views: 1406
Size:  130.7 KB


The bottom perimeter bracing was glued in after the tank had cured for a week to make sure the silicone in the corners was nice and dry before more glass and silicone was layered on top.

Name:  new-400g-perim-bracing.jpg
Views: 1422
Size:  135.6 KB


Name:  new-400g-teeth.jpg
Views: 1420
Size:  127.3 KB


Name:  new-400g-top-corner.jpg
Views: 1316
Size:  107.3 KB


Name:  new-400g-view-up.jpg
Views: 1225
Size:  128.8 KB


I want to thank Marineland for taking care of my situation after the original tank leaked, and for the upgrade of using three panes of Starphire glass rather than only two as previously built. Sending out a team of movers to bring it inside was a very nice touch, and definitely appreciated. This IS my dream tank, and I can't wait to watch my reef grow within this beautiful aquarium. It is absolutely gorgeous.

Submit "The 400g Has Arrived" to Digg Submit "The 400g Has Arrived" to del.icio.us Submit "The 400g Has Arrived" to StumbleUpon Submit "The 400g Has Arrived" to Google

Tags: marineland
Categories
Tank Entry

Comments

  1. washingtond's Avatar
    Seems more impressive this time than when you first got it. Can hardly wait to see it full of water and livestock. I am sure that you cannot wait either.
  2. debdp's Avatar
    Yay!! So excited to see it finally back, I know you have to be. Will definitely be watching for updates.
  3. melev's Avatar
    There will be plenty of those coming in the weeks to come.
  4. Trido's Avatar
    Very Nice Marc. Its feels like a year since the leak first started so long ago.
  5. melev's Avatar
    Quote Originally Posted by Trido
    Very Nice Marc. Its feels like a year since the leak first started so long ago.
    Marineland simply did an 18 month water test before they shipped my tank to me.
  6. yankieman's Avatar
    Wooo Hoooo glad to hear Marc , its been a long wait ,, I am looking forward to the progress ,, good luck!!! and dont forget the pic of your excited look ,, LOL ,,,
  7. brotherd's Avatar
    Congratulations.Looks like an outstanding tank.
  8. melev's Avatar
    The good news is that now that the source of all my power has returned, you can expect a lot more updates on Reef Addicts.
  9. Brad Syphus's Avatar
    This is great news Marc. I'm very Happy for you. I'm sure it will be in full glory in no time. Thank you for keeping us all up to date.
  10. B1N4RY's Avatar
    Congrats on the new aquarium. It looks amazing!
  11. brotherd's Avatar
    The extraordinary new and spotless mega tank of yours inspired me to spend 5 hours cleaning up mine.Even took a toothbrush to the corners. Your new tank does look absolutely amazing!
  12. Trido's Avatar
    Well, its been 36 hours since delivery. Have you started the plumbing yet?
  13. dahenley's Avatar
    its been 48 hours and 10 min since this was posted! which means there has been plenty of time between the delivery and posting....
    i want to see some sand, rabbit, toes, rock, and the list goes on!

    what is the schedule like or estimated continuance of the 400 looking like?
  14. melev's Avatar
    It'll be a few days as I have customers waiting for orders I must complete, and I have a few things to order in. It's a beautiful tank to see in person though, and I love it.
  15. edandsandy's Avatar
    CONGRATS! I know this has been a long overdue wait.... you have the patience of a saint!
    I cant wait to see the tank filled!