Entries pertaining to plumbing
Hey fellow addicts. I got a new 55 gallon pre drilled tank and stand that came with two holes in the bottom of the tank and came with two bulkheads and pipe. I have it all set up and need to figure what return pump I should get. Any advise? The overflow hole is 1.5" and the return is 1''.
Is it true that you should double the size of the pipe when using a mag drive pumps? For example my mag 9.5 is threaded for 3/4in should I use 1.5in? Really confused right now. Thanks, Colin
I have been thinking about the plumbing for a while and decide to use sketchup to get it down on paper. My goal is to have the setup to be as clean as possible. After seen glassreef build I wanted to do a clean build but under the stand(s). After much reading I plan on using the herbie overflow system. The two 1 inch holes will be used as the main drain and the two ¾ inch holes will be the emergency. The Main drain will be tied together into 1.5 inch pvc and a gate valve will be used to control ...
I don't think I'm getting enough flow, but my pumps gph seems to be high enough. What would you do if you had a 90 gallon tank with 2 Koralia Evo 1050 powerheads and a return pump? The ph's are positioned in the back corners both facing the middle of the front pane of glass, and the return is on the back right side pointed straight left. Would you redirect pumps? Add pumps? Keep in mind budget is a concern here. I can't just go out and buy vortech pumps or anything like that.
Everyone has been asking me about the new sump, and what its layout will be. I'm still thinking about my options, and nothing is set in stone. I really like the idea of a tunnel for some reason. If I can pull that off, so be it. If 1" of water drains from the display tank, that equals 13g of water. Plus whatever is in the plumbing. The sump needs to be able to hold any drainage when the power goes out. The footprint inside the stand is 81" x 32", ...