Plumbing

hello fellow reef addicts, i though i would bring you up to speed on my current project.

i purchased a 125g tank stand and hood used from a lfs i gave 350$ for it and its perfect no scratches and the back isn't tempered

the plan for the tank was to drill it and install a glass holes 3000gph overflow build a custom sump and move my 40gb that is already drilled and a established reef tank over beside the 125 and run it off of the ...

hey all, i have a 55g reef tank and im currently using a single mp10 to create the flow in my tank for a long time i used it on one end of the tank and it kinda left the other side of my tank dead, i intend to purchase antother one when i get a chance and find a good deal on one. anyways i recently moved the vortech to the back of my tank and about 6" from the surface of the water and dead center in the tank, it seems as of right now that this is the optimum placement for my tank, along with ...

here were my original ideas for my build that i posted on my local reef club forum

I have a 40 gal tank that i once had setup as a frag tank. I took the tank down and im going to drill and sump it and setup a reef tank.
I already have some of the equipment to get started and i only need a few more things to get it started, here is what i have.
40 gal breeder and stand (all sides un tempered)
quad t5 with leds
mega flow model 1 sump
heater
about 30-40 ...

Attached Thumbnails