Recent Blogs Posts

With the 60g on the stand, leveled and positioned near the wall - I left a small gap behind the tank to avoid salt-creep damage to the sheetrock - I needed to determine where to hang the Radion LED fixture over the tank. Using a 4' level, I placed it across the tank and set the light fixture on top. This permitted measuring the fixture from all four sides to get it centered. Hence, I was able to ascertain the distance from the rear wall and the right wall precisely for the hanging kit.
...

In a previous blog ( link ) I explained how I was securing the internal overflow to the base of the AGE tank. Well, even though it might have worked perfectly, my paranoia gene was flaring up and I kept thinking about how a leak from the base of the aquarium would require a full breakdown to correct the problem. Rather than just hoping for the best, I bought a tube of Aquarium-Safe silicone at Home Depot and applied it to the base of the box and reinstalled it.

...

After placing the 60g AGE tank on the Ez-Tube steel stand ( link ), I didn't feel comfortable with how it seemed to jiggle with minimal touch. It was empty, but the tank is heavy enough that it takes two people to place it on the stand. Water, sand and rock would add 600 lbs easily, and there's little doubt it would be even worse over time. Even cleaning the glass with a cleaning magnet would probably be concerning, so I decided to add some wood panels to the stand to limit racking. Plywood ...