View RSS Feed

Yyrkoon

Return pump woes

Rate this Entry
I'm not usually one to complain about noise, but noise associated with vibration gets on my nerves. I have this Iwaki MD-20RT pump that I bought years about, probably in 2006. I never used the pump, and before this weekend never ran it more than a few minutes. It's rated for high head, and seems to run cool enough, but there is significant vibration coming off of the unit. It's driving me nuts! I can feel the vibration on the ground NEXT to the stand though the carpet.

Click image for larger version

Name:	images.jpg
Views:	3234
Size:	6.9 KB
ID:	7692

Unless I can figure out what is causing the vibration, I think I need to replace the unit. Any suggestions? Has anyone ever had vibration in these pumps and repaired it?

Submit "Return pump woes" to Digg Submit "Return pump woes" to del.icio.us Submit "Return pump woes" to StumbleUpon Submit "Return pump woes" to Google

Comments

  1. stangchris's Avatar
    nothing wrong with pump thats how they are. a computer mouse pad can work wonders even a lil towel rolled up.
  2. Yyrkoon's Avatar
    It is hard plumbed, perhaps that is a potential culprit. I have the pump on four rubber feet, and have felt pads on each of the feet.
  3. Alaska_Phil's Avatar
    This is a big problem with commercial pumps, like the building heating pumps I deal with. Typically they use a section of flexible hose, or a rubber ball type connector between the pumps and hard plumbing to help isolate the vibration. So, re-plumbing with sections of spa-flex or hose may help.
  4. Midnight's Avatar
    Plus 1 on what Phil say
  5. Yyrkoon's Avatar
    http://www.vibrationmounts.com/store...=products8.htm (The blue metric GelPads) These are expensive, but I would how well they would work. I'll try the plumbing and a mousepad first, however.
    Updated 10-16-2012 at 08:29 AM by Yyrkoon (Clarification)