kayl

Corbin's Pets:






Advanced Aquatics





...

Ok, waters have cleared and everything appears to be bouncing back.

I took the time this last week to get all the new goodies I recently acquired set up and running on the tank. I'll add some pictures later of the different setups.
I added a Vortech Battery backup and installed the wireless expansion chip from EcoTech into my MP10es, making it a MP10wES. I mounted the battery backup in the rear of my stand.

In front of the backup, I mounted a 6x6x4 weatherproof ...

Update!
I moved the tank on the 13th. It was only a 10 mile move, but it still took about 4.5 hours once all was said and done.

Monti that grew onto back wall:


Empty tank


All the buckets!
...

The tank was cloudy white on Sunday after I finished getting everything put in it, not unexpected. It cleared up somewhat yesterday, but it appeared to have regressed today. My guess is that I'm getting a bacterial bloom from the sandbed being disturbed.

The makeup of the water that filled the new tank was probably 60-70% 3 day old heated, mixed saltwater @ pH, Salinity, & Temp and 40-30% saltwater that I moved with the tank. Water temps got down to about 72-73 when moving the ...

Attached Thumbnails

 

Anyone have any tips/advice for moving a tank? I'm moving mine on Saturday. My plans are below, any revisions or hints?

Plan:

1) Label all plugs (as far as what outlet in the DC8 they're plugged into)
2) Shut off return pumps, heater, media reactor, lights
3) Remove return pumps, heater, media reactor from rear chambers, remove light hood from top of tank
4) Throw return pumps into small bucket of vinegar for a good cleaning
5) Throw ...