Do It Yourself projects
I haven’t been involved in this hobby very long compared to other folks but learned very quickly how much of a pain it can be to eradicate, or try to eradicate pests such as Aiptasia, Majanos, Bubble Algae, zoa eating asterinas, and Marine Ich. When I started, I did what I’m sure all of us have done at one time or another: just drop things in the tank and hope for the best. I recently upgraded from a 70g to a 260g tank and decided never again! Unfortunately, everything I found online regarding ...
Updated 12-10-2012 at 03:31 PM by melev
As many of you know I had decided to do a restart on my tank and correct earlier mistakes/lack of knowledge from when I started my tank 2 years ago. Several of my corals were dead or dying and I had placed corals into my tank that I later realized was a mistake (Xenia, blue clove polyps, ect...) I looped my pump return from my sump back into my sump again, kept the skimmer running, maintained a constant temperature, maintained choeto in the refugium, and kept the biopellet reactor operational to ...
Updated 12-02-2012 at 01:33 PM by melev
Well I thought I would give a quick update on what was going on with my tank restart. I ordered 50lbs of keylargo rock from Marco Rock that has arrived. I purchased a 10 gallon tank and filled it up to use as my frag tank, painted the back glass, made a frag rack out of light diffuser, installed a heater, 30 gallon rated biowheel, added a nano korelia, added led lighting, waited for the temperature to level out and started moving over frags. I did not cycle the tank though ...
This prototype runs by a refrigerator timer motor and takes about 1 1/2 minutes for a complete revolution. I have noticed that rocks at low tide that are out of the water, but remain wet grow much more algae than rocks that stay submerged all the time. I am using that principal for this device to see if it grows more algae then my algae trough. It is lit with 18 LEDs that are about 1/2" from the belt which is cotton cloth on a plastic screen which is simple to remove. If it works ...