DIY projects

It has been a while since I have had the time to make any changes or upgrades to my tank let alone post anything on here but this morning I finally got around to getting my diy auto top off up and running to get this one mounted I got a left over piece of pvc from my closed loop setup and used a bastard file and my dremel to cut a notch on both sides of the pipe so it would have a snug fit over the acrylic that makes up the sump. using heat shrink and but clamps as well as wire nuts i not only extended ...

Attached Thumbnails

         

Anyone see this yet? A co worker told me about it today, gonna have to try and catch it.

http://animal.discovery.com/tv/tanked/

Hi all,
Recently came into a standard 29G and cherry stand. Older tank that I sealant stripped (only the inside) then resealed and water tight tested. Always kinda wanted a QT... and always kinda wanted a frag tank.

The DT is 75G w/35G fuge. What is the consensus... set it up as a frag and plumb it to the DT fuge... plumb it to its own fuge... say a 10G long... or set it up independant as a QT? Other ideas?

Come on gangsters... weigh in on this for me! ...

I have a standard 75g non drilled but thinking on drilling. My question is if i want to use 1" pvc, do i need use 1" bulkheads and what size glass drill bit do i use. As well how far from the black trim do i drill hole from?

Despite being in the hobby for about a decade now, and having set up numerous tanks, I've never made an official build thread, so I figured I'd share this process with the members here on RA. Heres a tank that I set up in my the entry way of my house, Its the first tank in my new home and I've been collecting parts over the past few months. With plenty of tanks to maintain and set up between customers and my store, my personal tank was, sadly, not on the top of my priorities. But its not all bad, ...