View RSS Feed

n2585722

42 Gallon Hex build

Rate this Entry
The first two photos are of the parts for the side panels and side panel doors. These are the same as the canopy side panels and doors only they are longer. The second two photos are of the side panel and door assembled. These are attached differently than the canopy side panels. In the fifth photo you can see the notches in the sides of the panel. These parts were notched so that they can be used on either side. Only every other notch is used depending on which side it is used on. This allows the panels to be attached to the inner stand frame by screws that are hidden by inserts where the panels come together. In the last photo you can see that the bottom rail is not flush with the bottom of the styles. This is a air vent like the one in the canopy only at the bottom of the panel instead of the top. There are five of these side panels. The back panel is different. It has a cabinet attached that will house the power bars for the control of the pumps, heaters and other powered equipment.
Attached Thumbnails Attached Thumbnails Click image for larger version

Name:	image.jpg‎
Views:	234
Size:	147.8 KB
ID:	10894   Click image for larger version

Name:	image.jpg‎
Views:	206
Size:	153.9 KB
ID:	10895   Click image for larger version

Name:	image.jpg‎
Views:	207
Size:	114.8 KB
ID:	10896   Click image for larger version

Name:	image.jpg‎
Views:	218
Size:	134.8 KB
ID:	10897   Click image for larger version

Name:	image.jpg‎
Views:	207
Size:	119.0 KB
ID:	10898  

Click image for larger version

Name:	image.jpg‎
Views:	234
Size:	128.6 KB
ID:	10899  

Submit "42 Gallon Hex build" to Digg Submit "42 Gallon Hex build" to del.icio.us Submit "42 Gallon Hex build" to StumbleUpon Submit "42 Gallon Hex build" to Google

Categories
Tank Entry , ‎ DIY projects

Comments